Stephens PotteryFor All Your Pottery Requirements

Ceramic and porcelain What is the difference? Ceramic knowledge 16 Q

1 What is ceramics?
Ceramics is the raw material of clay, barren of raw materials and flux ratio right from raw materials, grinding, pressing and firing at high temperature under a series of physical and chemical reaction to the tough material.
2, ceramic and porcelain What is the difference?
The difference is that the water absorption. Water absorption of less than 0.5% of porcelain, ceramics more than 10%, somewhere between the two semi-porcelain.
3, routine, in the ceramic tile is it? What is the ceramic?
The most common variety of tiles, unglazed tiles Jin, most of sanitary ceramics is porcelain, the water absorption 0.5% E; antique tiles, small tiles, crystal tiles, wear-resistant tiles, matt tiles, etc. (wall climbing) is stoneware Bricks, tiles and a half, 10% water absorption 0.5%.
4, What is absorption?
Water absorption of ceramic products is the stomata in the amount the water absorption percentage of the total products.
5, ceramic tiles, classified as?
After use in the wall, outside wall tiles and floor tiles.
Divided the material: tiles – good transparency, fine cuts were conchoidal, semi-porcelain tiles – poor light transmission, high mechanical strength, was the cross-section stony; Ceramic tiles – opaque, mechanical intensity of rough, dry pressing method is divided into pressure method, synthetic method, grouting.
6, ceramic tiles, what types?
Glazed wall tiles, tiles, flower disc, waist, outer ceramic wall tile, tiles, unglazed tiles, wool tiles Kam, ceramic Tile: Tile, tile, split tiles, red tiles, bricks Kam, square, brick-head.
7, polished and fossil glass What is the difference?
Polished on the market a variety of terminologies, such as polishing tiles, full body, tiles, glass complete fossils, fossil glass is polished, it is the market is popular, professional It is called "ceramic tile polishing."
8, can be walls on the bathroom floor it?
Wall tiles (tiles) is not generally shop on the ground. Ceramic tile is the result, the mechanical strength of low-pressure shop on the ground easily damaged, long-term wet bathroom floor, broken tiles damp inflation; In addition, non-slip tiles are not glazed.
9, superior product and a product (Qualified) What is the difference?
Superior products and a product eligible products can not use the product properly, you do not use the function is impaired. reflected particularly in the quality and appearance be different deformation permissible range, and as surface stains, holes, etc..
10, superior product is not defective?
Since ceramic Products are all kinds of raw materials by high temperature firing of the products, impurities, deformation and other defects can not be avoided completely, allowing the national standard a certain defects are present. Such as surface quality, polished high-quality product offers at least 95% of the 0.8 million vertical distance from the surface observed Tile defects.
11 is the ground floor to do mud-brick?
The main raw materials for the manufacture of ceramic tiles: chemical substances such as kaolin and kaolin include sand, stone powder, black mud, and Pak Nai and other chemical materials include hair pigment, water reduces agents. Popular opinion is made of mud bricks, but It is no ordinary mud to a specific chemical composition, can achieve high quality and stability of an ideal raw material.
12, red body Brick is a ceramic brick, stone Tofo tile, brick red body as Tofo brick it?
This statement is not scientific. Decision is a green body green body color is the raw material of iron, titanium content, the higher levels are shown after firing the deeper the color, it is determined the color of the green body, no effect on the quality of the bricks. Factors affecting the intrinsic quality of the brick is mainly seen in the extent of their sintering, the quality is really good brick "burn through a" brick
13, polished or painted with antifouling agent why grow?
polishing and waxing to protect better the stone, to prevent the construction, the impact of foreign objects, friction and damage growth can increase the distance gloss tile, more importantly, the slabs are filled Pores so dirt will not fill gap openings that are easy-to-day cleaning.
14, polishing shop in the hanging wall of the time Why?
Mainly for the safety concerns. Polished low water absorption, which again smooth, hard cement mortar with cement, covered with other tiles from the large, easy.
15, Matt and Crystal brick paving Non-slip tiles on which is better in comparison?
Matt brick slide better because matt non-slip tiles are used in general design.
16, polished tiles, tiles matt, crystal slip tiles which is better? Why?
Best Anti-slip tiles, polished as by the more polished tile surface adsorption. About the Author

I am a professional writer from China Manufacturers, which contains a great deal of information about $keyword_li, welcome to visit!